fbpx
My Cart
$0.00

We’re sorry we have to suspend operations January 1, 2021.

click here for details

Interested in purchasing the company?


While OilExTech, LLC is currently located in Oregon, USA, it can easily be moved practically anywhere world-wide! Phone number no longer works - any interested parties please email us at info@oilextech.com.


Ask Transworld Business Advisors
My Cart
$0.00
Star Anise Essential Oil Extraction Process

Star Anise Oil Extraction Process

Click here to Download and Print a PDF

Star Anise Oil Extraction

What you need:
– EssenExTM 100 Distillation Kit for Star Anise oil distillation
– 50-60 grams of Star Anise “Stars”.
– Grinding tool (blender or food processor)

Preparation:
– Place Stars in Freezer for 24 hours.
– For initial runs, use 50 grams of the Stars. Later, more or less may be used.
– Use a blender or grinder to render <3mm particles of the stars.
– Add water to powder with ratio 1 ml water per gram of botanical. ( 1:1 by mass)
– Place in EssenExTM as described in user manual.

Trial:
– Place the reactor into the microwave with mug of water.
If multiple batches are run, change water in the mug between trials.
– Each batch should run for 5.5 minutes on a power setting of HIGH (1100 watts)
Lower power units: simply add 30 seconds to a minute for the cooking phase.
– Allow the batch to cool for 6 minutes. In or outside the microwave. Caution: do not raise lid prior to 4 minutes and be careful if moving from microwave as jar will be quite warm initially.
This is a key step to your success. Cooling allows the vapors to condense and form more oil and it allows the reactor to be handled much easier!

Collection:
– Pour top contents of the beaker into the easy separator and rotate it using the palms of your hands while resting it on a cloth (kitchen towel) on a hard surface (counter top). The motion should     be similar to starting a fire with sticks.
– After a few seconds, stop rotating the separator and observe the oil layer.
– Repeat the process if you believe more oil will collect.
– Once the oil is separated (above the hydrosol in the neck of the flask), use the pipette to place it in a vial.

Yield:
– Upon lifting the lid, a small amount of ice should be remaining on screw.
If not, then reduce the amount of water added.
– With nominally good Anise, 1.5 to 3% by mass.

For any question please contact us at Info@oilextech.com or fill out our Customer Feedback at our website http://www.oilextech.com/contact-us/